Mobile Hydraulic Lifting Work Vehicle
E290
A lightweight mobile hydraulic lifting platform for municipal painting and maintenance, worksite material transfer, campus equipment servicing, warehouse picking, exhibition setup, and other scenarios. Rear-wheel drive and two front caster wheels provide small-radius maneuverability in confined spaces. A smooth 0.75 m hydraulic lift, standard RF remote control, optional smart follow, and navigation-kit support make it a cost-effective unmanned solution for low-height work and short-distance transfer.
Suspension
Fixed Suspension
Drive Type
2WD
Obstacle Clearance
10 cm vertical obstacles
Communication
RF
Control Mode
Remote Control
Popular Modification
Smart Follow
Product Overview
The E290 is a lightweight vehicle purpose-built for low-height work and short-distance transfer. Its chassis uses a distinctive rear-wheel-drive layout with two front caster wheels: the rear wheels provide steady propulsion while the casters permit tight-radius steering. It moves and turns smoothly through alleys, worksite corners, warehouse aisles, and campus paths, combining efficient travel and confined-space maneuverability on paved ground and mildly uneven dirt. A hydraulic work platform at the center of the vehicle lifts up to 0.75 m using a mature hydraulic drive for smooth travel and a stable load surface. It covers height adjustment for street and wall painting, worksite material transfer and loading, municipal sign installation and maintenance, low-height factory equipment servicing, middle-rack warehouse picking, exhibition-stand setup, and greenhouse care. It replaces repeated climbing and manual carrying to reduce workload while improving efficiency and safety. A standard RF remote lets an operator control both travel and platform lifting from a distance without entering the work area. Optional smart follow supports continuous work while walking. The standard vehicle is remotely controlled, but general hardware interfaces are reserved for a navigation kit that can add autonomous positioning, route following, and path planning for industry-specific configurations.
- LISHO patented product
- Mobile hydraulic lifting work vehicle
- Drive-by-wire chassis
- 2WD
Specifications
General Specifications
| Parameter | Specification | Notes |
|---|---|---|
| Model | E290 | |
| Dimensions (L × W × H) | 150 x 90 x 87 (cm) | |
| Curb Weight | 200 kg | Standard configuration |
| Rated Payload | 300 kg | |
| Control Mode | Remote controller | |
| Communication Range | 200-3500 m | Optional remote controller models support different maximum control ranges. |
Chassis Performance
| Parameter | Specification | Notes |
|---|---|---|
| Drive Type | 2WD | Caster wheels x 2 |
| Suspension | Fixed suspension | |
| Steering | Differential steering | |
| Braking | Physical parking brake | Power-off braking with secondary protection |
| Tire Size | Diameter: 52 cm; width: 11 cm | 4.00-10 |
| Ground Clearance | 10 cm | Chassis clearance from the ground |
| Track Width | 68 cm | |
| Minimum Turning Radius | 0 m | 360° rotation in place |
| Maximum Obstacle Height | 10 cm | |
| Maximum Climbing Angle | 15° | |
| Maximum Speed | 5 km/h |
Electrical System
| Parameter | Specification | Notes |
|---|---|---|
| Motor | 500 W permanent-magnet synchronous motor | Quantity: 1 |
| Motor Controller | Special-purpose vehicle motor controller | Quantity: 1 |
| Vehicle Control Unit | Optional LISHO-developed VCU | Quantity: 1 |
| Battery Type | LiFePO4 battery with new cells | Jikong BMS |
| Battery Capacity | 50 Ah | 48 V 50 Ah x 1 |
| Rated Voltage | 48 V | DC power supply |
| Operating Time | 6~7 hours | Continuous operation below rated payload |
| Charging | External adapter | |
| Charging Time | 6 hours | |
| Communication | RF |
Payload Equipment
| Parameter | Specification | Notes |
|---|---|---|
| Hydraulic System | 2,000 kg capacity, 2 kW | |
| Maximum Lift | 75 cm |
Popular Modifications
| Parameter | Specification | Notes |
|---|---|---|
| Smart Follow | Smart follow + ultrasonic stop and obstacle avoidance |
Key Features
High Maneuverability
A dedicated rear-wheel-drive and front-caster layout provides steady propulsion at the rear and tight-radius steering and fine in-place adjustment at the front. It moves flexibly through alleys
Smooth Hydraulic Lifting Platform
A hydraulic work platform at the center of the vehicle lifts up to 0.75 m. Its mature hydraulic transmission gives smooth
Application Scenarios
Municipal Street Work
Painting
Construction Transfer
Material and tool transfer with adjustable loading height.
Campus Maintenance
Low-level equipment
Warehouse Picking
Mid-level shelf handling
Exhibition Setup
Booth construction
Greenhouse Care
Crop care
Gallery
Related Technologies
Frequently Asked Questions
How high does the platform lift and how stable is it?
The hydraulic platform lifts up to 0.75 m. Its mature hydraulic drive moves smoothly and provides a stable surface for materials
How maneuverable is it in confined spaces?
Rear-wheel drive and two front caster wheels provide a small turning radius through street alleys
What surfaces can it operate on?
It handles paved surfaces
What is the control method and remote range?
Optional RF remote controller models support 200-3500 m ranges for travel and platform lifting
Can autonomous navigation be added?
The standard vehicle uses remote control. Reserved hardware interfaces support an optional navigation kit for positioning
Where else can it be used besides street work and construction transport?
Applications include municipal sign maintenance
Which upgrades and customizations are available?
An optional smart-follow module supports continuous person-following work
What should be done if a fault occurs?
Operators can monitor status remotely and immediately stop motion or move the vehicle away. Its mature hydraulic and travel systems are straightforward to inspect and service on site.
Want to See How the E290 Fits Your Scenario?
Contact the LISHO team for product materials, configuration, and customization support.